- Overview
- Product Description
- Product Parameters
- After Sales Service
- Cooperation customer
- Certifications
- Company Profile
- Packaging & Shipping
Basic Info.
Packaging & Delivery
Product Description
The car testing line guarantees the insure the safety of the car after the final assembly. Including bumpy road tests, four-wheel aligners, axle cargo tests, speed testers, boscage testers, sideslip tests headlight testers, and so on. Through the control system, once the auto passes all the test equipment, will compared with the design date, and also acclimated according to the date of different models to achieve the plant conditions. At present, we have a variety of configurations of testing outfits to meet the requirements of different guests. communicate with us to get further information.
Car testing line process
Bumpy road test → four-wheel alignment → speed test → axle load test → brake test → steering test → light → sound level → side slip test → rain test → paint repair → general inspection → cleaning
As long as there are roads, there are bound to be unevenness, undulations, and potholes. Therefore, a car must adapt to the road surface of the ups and downs and uneven, so the vehicle has a suspension system, there are springs, there are shock absorbers. In daily driving, the car is precise because the road will pass through high and low ups and downs, potholes, and uneven roads, so there will be "different cars with different comfort" differences embodied. Some cars drive through the uneven road when the body comes from intense vibration, followed by an obvious rocking swing, we call it "poor comfort", and on the contrary, the car through the uneven road when the vibration is soft, and can quickly make the swaying body to calm down, we call it "good comfort! We call it "good comfort".
Today's road surfaces are becoming increasingly uneven due to the growing number of speed bumps and potholes, which can lead to problems with your vehicle's steering and suspension. Using a four-wheel alignment system, we can check and adjust the center (toe-in and toe-out), caster, front camber, rear camber, and thrust angle.
The drum brake test rig with axle weight is used to measure the braking force and wheel weight of each axle (left and right wheels) of the inspected vehicle. It is mainly used to test the braking performance of the vehicle under the rated load-bearing mass. This equipment is the core part of the motor vehicle safety performance testing and high technical performance requirements of the safety testing equipment.
The main body is welded as a whole, has high strength, no need to fix the main body on the ground with ground bolts, is easy to adjust and install, reduces the floor space, saves investment, can choose the test bench with or without airbag lifting device (airbag lifting device to facilitate the vehicle in and out of the test bench, with automatic stopping device, to prevent the tire from wearing out.
A car speedometer tester is used to detect the display value error of the speedometer when the vehicle is traveling. Vehicle speed odometer tester is one of the important equipments for automobile safety performance testing.
The structure is sturdy and durable, easy to debug, with special knurling on the roller surface, high strength, wear resistance, and large friction coefficient, improving the testing efficiency. It is equipped with a safety protection device to protect the wheels from scratching the tester when it is running at high speed.
The side slip test bench is mainly used to measure the amount of side slip produced by the joint action of the camber angle and front beam angle of the automobile. In the process of driving in a straight line, it utilizes the left and right motion momentum of the side slip plate to measure the size and direction of the wheels and to judge whether the inspected vehicle is qualified or not. It is one of the important equipment for automobile safety performance testing. It can also assist the four-wheel aligner to test before measurement, to judge whether the vehicle needs to adjust the four-wheel alignment, which can save the vehicle maintenance time.
Automotive Light meters and sound level meters are mainly used for measuring automotive lights and sound system equipment. Laser-assisted light tracking system, counterweights in the positioning bracket allow the optical box to move up and down easily, battery-powered in low-power mode, lightweight and flexible, simple to operate, easy to move and maintain
The automobile car rain test room is used for automobile whole or parts in different intensities of rain on the product seepage and leakage of water tightness test, test the waterproof performance of automobile products, for product improvement and research and development to provide a reference basis. In real life, when a car driving on the road encounters rain impact, puddles splash water, and other situations, the automotive rain test room in the construction design, simulates the situation of high-intensity rain.
The automobile rain test room in the design, needs to carry out all aspects of the rain test, the strength of the water spray and water spray angle should be suitable, and in line with national standards. In addition consider the water supply system of the automobile rain room, to be able to do not lack of water, recycling water for testing, water filtration and removal of impurities, and recycling water. Automobile rain test room to ensure that the vehicle from the side and top of the car window surface for water spray, all-round water spray test, water spray test, water pressure, and flow should reach the national standard.
Preventing Water Leaks: Rain testing is effective in identifying potential water leaks in doors, windows, sunroofs, luggage compartments and other sealed areas, preventing rainwater from entering the vehicle. This is vital to keep the electronics, seats, and other interior components of the vehicle dry, especially in humid or rainy areas.
Protecting the vehicle's electrical system: modern cars have complex electrical systems, with many key components located inside and outside the vehicle at connections. If not properly sealed, rain or moisture ingress can cause electrical shorts, sensor failures or other system malfunctions, seriously affecting the safety and proper functioning of the vehicle.
Enhanced interior comfort: The sealing of the vehicle's interior is critical to the driving experience. Rain detection ensures that passengers are not exposed to water intrusion during heavy rain or wet weather, keeping the interior dry and comfortable.
Extend the life of the vehicle: Moisture penetrating the interior of a vehicle can lead to corrosion of metal parts, deterioration of materials or damage to electrical components. Through rain testing, manufacturers can ensure that their vehicles are watertight, reducing the cost of damage and repairs due to water leakage at a later stage, thus extending the life of the vehicle.
Compliance with regulations and market demands: Many countries and regions have strict regulations regarding the waterproofing of vehicles, in particular, rain testing must be carried out during the production process. This test ensures that the vehicle complies with international standards and market demands and enhances brand reputation.
Simulate a variety of weather conditions: The rain shower room test not only simulates normal rainfall but also extreme weather conditions such as torrential rain, strong winds accompanied by rain, etc. through different water pressures and angles. This ensures that the vehicle can be driven normally and keeps the interior dry even in bad weather.
Therefore, it is important to ensure the sealing, waterproof performance, and overall quality of the vehicle, which is directly related to the durability, reliability, and user experience of the vehicle after the car has been tested by the rain shower room.
| No | Product name | Size |
| 1 | Bumpy Road Test | Customizable for different models |
| 2 | Four-wheel alignment | Customizable for different models |
| 3 | Brake System | Customizable for different models |
| 4 | Vehicle speed test bench | Customizable for different models |
| 5 | Side slip test bench | Customizable for different models |
| 6 | Light meter and sound level meter | Customizable for different models |
China Vehicle Industry Provides One-Stop Vehicle Solutions
Skd Parts Guidance And Supply
We produce all the parts by ourselves, so we can offer you the stamping and auto parts and give you the production process guidance. Just as you want to start building your own bus/car factory, a bus/car needs more than 10,000 parts, you do not have to produce all the parts, many parts we already have ready-made molds and solutions, and we can provide good quality and cheap KD parts.
Technical Guidance And Supply
We have already directed the design for dozens of companies. According to your production plan and local labor cost, we will reasonably suggest some necessary equipment, so you can only spend perfect money and realize your car dream.
One-Stop Shopping Service
We provide a one-stop purchasing system to provide you with electric vehicle solutions. This will be a brand-new, epoch-making product, and you will become the most important electric vehicle manufacturer in your country
We design different automotive installation lines, automotive test lines, automotive welding lines, etc. according to the needs of customers, we will also send our engineers to the site to carry out installation guidance, and we cooperate with customers all over the world, such as Egypt, Russia, Thailand, Laos, Ethiopia, South Korea, Dubai, etc.
We have been very successful in the automotive assembly industry, and we have achieved a great deal, of course, we have achieved quite a lot of certificates, such as a CE certificate, ISO certificate, and IATF certificate, and we will be according to the size of the customer's origin, the needs of the development of the program.
China Vehicle Industry Co., Ltd is a company that provides the whole auto industry chain services, from vehicle manufacturing equipment to vehicle parts, electric drive technology, testing equipment, auto parts, and training services. At the same time, we provide industry solutions to help you build your auto dream. At the same time, we also support charging station technology, which has been the world's current photovoltaic charging technology. Guided by a commitment to excellence, we continuously explore new possibilities and achieve ambitious goals.
We produce all the parts by ourselves, so we can offer you the stamping and auto parts and give you the production process guidance. Just as you want to start building your own bus/car factory, a bus/car needs more than 10,000 parts, you do not have to produce all the parts, many parts we already have ready-made molds and solutions, and we can provide good quality and cheap KD parts.
In response to the opportunities and challenges of the current era, China Vehicle Industry Co., Ltd. specializes in providing customized technology production line designs and targeted solutions for customers across welding, painting, assembly, and testing processes. Our goal is to help our customers realize their automotive dreams and contribute to a better life and society through excellence in automobile production and manufacturing.
Car assembly lines adopt the method of combining an iron frame with an export wooden packaging box to enhance packaging protection for parts susceptible to friction. Apply phosphating electrophoresis anticorrosion treatment to all six vehicle body skeletons and steel components.