Basic Info.
Product Description
wall mount ac dc power adapter 220v to 9v 2.5a 12v 2a 24v 1a
Green Mode:
| Model | O/P Voltage | O/P Current | Watt |
| MKS-0503000S | 5.00V | 3.00A | 15.0W |
| MKS-0603000S | 6.00V | 3.00A | 18.0W |
| MKS-0753000S | 7.50V | 3.00A | 22.5W |
| MKS-0902500S | 9.00V | 2.50A | 22.5W |
| MKS-1202000S | 12.0V | 2.00A | 24.0W |
| MKS-2401000S | 24.0V | 1.00A | 24.0W |
Product description
1. Picture Show:
Specification for approval:12VDC 2A AC/DC Power Adapter
The test of samples is only based on UL60950/EN60950 standard, if you need other standards,please email us.
| CUSTOMER: | / |
| P/N of customer: | N/A |
| DESCRIPTION: | 12VDC 2000mA / UL WallMount type |
| P/N of Merryking: | MK-C4082-001 |
| Model of Safety Certification : | MKS-1202000 |
| Quantity of samples: | 3PCS |
| Test DATE: | 02rd. August . 2018 |
ELECTRICAL PERFORMANCE
2. General Description
This specification defines the input, output, performance characteristics, and environment, noise and safety requirements for 24Watts adaptor. The adaptor is full range AC(100~240V) input and output 12V
3. INPUT FEATURE
3.1 INPUT VOLTAGE RANGE:90Vac to 264Vac.
3.2 RATED INPUT VOLTAGE:100Vac to 240Vac.
3.3 INPUT FREQUENCY RANGE:47Hz to 63Hz.
3.4 INPUT CURRENT:0.6A Max. (I/P100-240Vac).
3.5 INRUSH CURRENT:60A max. at 100-240Vac input for a cold start at 25ºC.
3.6 EFFICIENCY:
Higher than 86.2% at 100-240Vac input and output (25%, 50%, 75% & 100% load.).
4. OUTPUT FEATURE
| RATED OUTPUT:12VDC | SPEC. LIMIT | REMARK | |
| Min. value | Max. value | ||
| Output regulation | 11.4V DC | 12.6VDC | ≤±5% |
| Output load | 0.0A | 2.0A | |
| No Load Power consumption | - | 0.0750.1W 0.21W 0.3W | Input voltage:115 & 230VAC |
| Ripple and Noise | - | 150mVp-p | 20MHz Bandwidth 10uF Ele. Cap. & 0.1uF Cer. Cap |
| Output Overshoot | - | 10% | |
| Line regulation | - | ±1% | |
| Load regulation | - | ±5% | |
| Turn-on delay time | - | 3000mS | |
| Hold up time | 10mS | - | Input voltage:115Vac |
| 20mS | - | Input voltage:230Vac | |
5. SAFETY STANDARD
5.1 The green mode power supply shall be certified by the following international regulatory standards :
| Certificate | Country | Standard |
| UL / cUL | USA/Canada | UL60950-1 UL60065 UL62368-1 UL60601-1 UL1310 |
| GS | Germany | EN60950-1 EN60065 EN62368-1 EN60335-1 EN61347-1 EN60601-1 EN61558-1 &-2-16 |
| CE | Europe | EN60950-1 EN60065 EN62368-1 EN60335-1 EN61347-1 EN60601-1 EN61558-1 &-2-16 |
| SAA | Australia | AS/NZS60950-1 AS/NZS60065 AS/NZS60335-1 AS/NZS61558-1 &-2-16 |
| PSE | Japan | J60950-1 J60065 J60335-1 J61558-1&-2-16 |
| S-Mark | Argentina | IEC60950-1 EC60065 IEC60335-1 IEC61558-1 &-2-16 |
| CCC | China | GB4943 GB8898 GB4706.1 |
| KC | Korea | K60950-1 |
| BSMI | Taiwan | CNS13438 & 14336-1 |
| PSB | Singapore | IEC60950-1 IEC60335-1 IEC61558-1 &-2-16 |
| CB | IECEE | IEC60950-1 IEC60335-1 IEC61558-1 &-2-16 |
6. EMC STANDARDS
6.1 The power supply shall meet the following EMC standards:
| Certificate | Country | Standard |
| FCC | USA | FCC PART 15B FCC PART 18 FCC PART 15C |
| ICES | Canada | ICES-003 ICES-001 |
| CE | Europe | EN55032 EN55024 EN61000-3-2 EN61000-3-3 EN55014-1 EN55014-2 EN61000-3-2 EN61000-3-3 EN55015-1 EN61547 EN61000-3-2 EN61000-3-3 |
| C-Tick | Australia | AS/NZS CISPR22 AS/NZS CISPR14.1 AS/NZS CISPR15 AS/NZS CISPR13 |
| KCC | Korea | K32/K35 K14 K11 K15 |
| PSE | Japan | J55022 J55013 J55014 J55015 |
| CCC | China | GB9254 GB4343.1 GB17743 GB13837 GB17625.1 |
7. ELECTRIC WITHSTANDING STRENGTH(HI-POT)
Primary to Secondary AC3000V/10mA , 1 minute for type test. 3 second for production.:
8. PROTECTION FEATURE
8.1 OVER-CURRENT PROTECTION:
The green mode power supply shall be hiccupped when any output operating in overload condition(set@ Max load 120~180 %) under any line condition for an indefinite period of time. The power supply shall be self - recovery when the fault condition is removed.,(120~180 %).
The power supply shall be hiccupped and no damage shall occur when any output operating in a short circuit condition under any line condition for an indefinite period of time. The power supply shall be self-recovery when the fault condition is removed.
9. ENVIRONMENTAL CONDITIONS/
9.1 OPERATING:
The power supply shall be capable of operating continuously in any mode without performance deterioration in the following environmental conditions.,,.
9.1.1 Ambient Temperature:-20ºC~60ºC
9.1.2 Relative Humidity:10%~90%
9.1.3 Vibration:1.0mm, 10-25Hz,15 minutes per cycle for each axis (X, Y, Z)
9.1.4 Cooling:The power supply will operate with convection cooling .Blocking of vents must not cause damage to The power supply. ,.
9.2 NON-OPERATING:
The power supply shall be capable of withstanding the following environmental conditions extended periods of time, without sustaining electrical or mechanical damage and subsequent operational deficiencies.
9.2.1 Ambient Temperature:-30ºC~70ºC
9.2.2 Relative Humidity:10%~90%
9.2.3 Vibration and Shock
The power supply shall be designed to withstand normal transportation vibration per MIL-STD-810D, method 514 and procedures X, as it s mounted in the chassis assembly and packed for shipping.
10. Energy Saving (Level VI / Level 6) .
10.1 US DOE: Office of Energy Efficiency and Renewable Energy 10 CFR Parts 429 and 430
10.2 CEC: Appliance Efficiency Regulations (California Code of Regulations, Title 20, Sections 1601 through 1608) dated July 2015
10.3 NRCAN: Amendment 11 to the Energy Efficiency Regulations for External Power Supplies, published on October 12, 2011 in the Canada Gazette, Part II
10.4 Other (Specify): International Efficiency Marking Protocol for External Power Supplies - Level VI
10.5 Other (Specify): Australian (GEMS) and New Zealand : AS/NZS4665.1-2005+A1:2009;
AS/NZS4665.2-2005+A1:2009
10.6 Other (Specify): EU Directive for Energy-related Products ErP 2009/125/EC and Implementing Measure (IM) no. EC278/2009 for External Power Supply
10.7 Other (Specify): Code of Conduct on Energy Efficiency of External Power Supplies Version 5
11. RELIABILITY AND QUALITY CONTROL
11.1 MTBF : The predicted and demonstrated MTBF must be greater than 50K hours at 25º C.
11.2 BURN-IN : The power supply shall undergo a minimum of 4 hours Burn-In test under full load at 40ºC~±5ºC .
11.3 COMPONENT DERATING: Semiconductor junction temperatures shall not exceed the manufacturer's maximum thermal rating.
11.4 QUALITY GUARANTEE:2 years warranty.
12.WEIGHT : The weight of the power supply shall be about 160g.
13. MECHANICAL REQUIREMENT : The power supply size:L74*W52*H34mm.
14. INSULATION RESISTANCE : Input to output:50M OHM(500VDC)
15.LEAKAGE CURRENT: The leakage current shall be less than 0.25mA for classII when power supply is operated maximum input voltage and maximum load.
16. MAJOR MEASURE EQUIPMENT :
A. AC SOURCE :AFC-500W
B. POWER METER:CHROMA 2100
C. ELECTRONIC LOAD:PRODIGIT 3310C
D. OSCILLOSCOPE:TDS-2012B
E. DIGITAL MULTIMETER:Fluke 4.5
F. DC POWER:WYK-6030
G. HI-POT TESTER:LANKE ELECTRONICS 7112
H. INSULATION RASISTANCE TESTER:YD2681A
PRODUCT OUTLINE DIMENSION
Unit:mm
Tolerance:±1 Color: White or Black
DC CORD
Unit:mm Tolerance: Color : Black or Whit
DC Wire of Adapter :
UL2468 20AWG L=1.5m or 1.8m
OEM&ODM
About Merryking Factory :
In Merryking's workshop, some key production processes have used machines instead of human labor,
which can improve production efficiency and ensure product quality.
2->.: OEM/ODM are both available.
3->.: Fast response,professional sales and engineers follow up your business.
4->.: Quality Assurance ,All adapter have been 100% tested before shipment. Serious
aging test for a few hours before packing to make sure reliable quality
5->.: Lead time: sample in stock; bulk production 10~15 days after deposit.
6->.: Silk print or heat transfer print LOGO on adapters and customize color box and
outer package.
Packaging details:
1,Free white box for each power adapter
2,carton size:100pcs/ctn 38.5x35x32.5cm
3,DHL/FedEx/UPS: 3-5 working days (for small volume )
4,Air Shipping: 5-7 working days
5,Sea shipping: 20-28 days (for large volume)
Shipping mark: Based on your requirement.
FAQ:
Q: What is your MOQ?
A: Generally our MOQ for each model is 1000PCS, we can discuss in details if you have special requirements, like big quantity for the whole order but small quantity for each model.
Q: How about your warranty ?
A : Generally we offer 2-year warranty for our products. Quality is the most important for long-term business partnership, and it is also our company aim to offer high quality and guaranteed products to help our clients expand their target markets.
Q: How can I finish my payment?
A: T/T, L/C, Western Union are all acceptable, PayPal is also OK.
Q: How can I get detailed specifications about this product? Do you have catalogue and price list?
A: We have all the specifications, catalogues and price lists for each model. Welcome to contact us for detailed information via the contact ways mentioned below anytime!
Q: What is shipping method?
A: Samples will be sent via DHL, UPS, FedEX, TNT, EMS, etc. while bulk goods will be sent by sea or air. If you have familiar forwarders in China, we can send our goods there to save your cost.
Q: How about sample? For free?
A: YES! Generally we offer 1-3PCS sample(s) for your test FOR FREE, but you need to bear the freight cost. If your sample quantity is more than 3PCS, we will charge some sample fee, and we might return it when you place your first formal order as we discuss ahead.
Contact me:
Should you have interest in our adapters, please do not hesitate to contact us!
Nikki Xiang
merryking.en.made-in-china.com
MERRYKING ENTERPRISES (HK) CO., LTD.
SHENZHEN MERRYKING ELECTRONICS CO., LTD.